Cisco Catalyst 2960 Command Reference Manual page 560

Hide thumbs Also See for Catalyst 2960:

Table of Contents

This example shows how to set the speed on a port to 100 Mb/s:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# speed 100

This example shows how to set a port to autonegotiate at only 10 Mb/s:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# speed auto 10

This example shows how to set a port to autonegotiate at only 10 or 100 Mb/s:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# speed auto 10 100

You can verify your settings by entering the show interfaces privileged EXEC command.

Related Commands

show interfaces

Catalyst 2960 Switch Command Reference

Specifies the duplex mode of operation.

Displays the statistical information specific to all interfaces or to a specific

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Table of Contents