Show Etherchannel - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (788 pages)
Table of Contents
Advertisement
show etherchannel
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
Syntax Description
channel-group-number
detail
load-balance
port
port-channel
protocol
summary
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
If you do not specify a channel-group, all channel groups are displayed.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Catalyst 2960 Switch Command Reference
2-446
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
(Optional) Number of the channel group. The range is 1 to 6.
Display detailed EtherChannel information.
Display the load-balance or frame-distribution scheme among ports in the
port channel.
Display EtherChannel port information.
Display port-channel information.
Display the protocol that is being used in the EtherChannel.
Display a one-line summary per channel-group.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8604-03
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Table of Contents
