Cisco Catalyst 2960 Command Reference Manual page 416

Hide thumbs Also See for Catalyst 2960:

Table of Contents

show link state group

This is an example of output from the show link state group detail command:

Switch> show link state group detail

(Up):Interface up

Link State Group: 1 Status: Enabled, Down

Upstream Interfaces : Gi0/15(Dwn) Gi0/16(Dwn)

Downstream Interfaces : Gi0/11(Dis) Gi0/12(Dis) Gi0/13(Dis) Gi0/14(Dis)

Link State Group: 2 Status: Enabled, Down

Upstream Interfaces : Gi0/15(Dwn) Gi0/16(Dwn) Gi0/17(Dwn)

Downstream Interfaces : Gi0/11(Dis) Gi0/12(Dis) Gi0/13(Dis) Gi0/14(Dis)

(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled

Related Commands

link state group

link state track

show running-config

Catalyst 2960 Switch Command Reference

(Dwn):Interface Down

Configures an interface as a member of a link-state group.

Enables a link-state group.

Displays the current operating configuration. For syntax information,

select Cisco IOS Configuration Fundamentals Command Reference

for Release 12.2 > Cisco IOS File Management Commands >

Configuration File Commands.

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

(Dis):Interface disabled

Show Quick Links

Table of Contents