Queue-Set - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Catalyst 3750 Switch Cisco IOS Commands

queue-set

Use the queue-set interface configuration command on the switch stack or on a standalone switch to map

a port to a queue-set. Use the no form of this command to return to the default setting.

Syntax Description

The queue-set ID is 1.

Command Modes

Interface configuration

Command History

This example shows how to map a port to queue-set 2:

Switch(config)# interface gigabitethernet2/0/1

Switch(config-if)# queue-set 2

You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged

EXEC command.

Related Commands

mls qos queue-set output buffers

mls qos queue-set output threshold

show mls qos interface

queue-set qset-id

no queue-set qset-id

ID of the queue-set. Each port belongs to a queue-set, which defines all the

characteristics of the four egress queues per port. The range is 1 to 2.

Modification

This command was introduced.

Allocates buffers to a queue-set.

Configures the weighted tail-drop (WTD) thresholds,

guarantees the availability of buffers, and configures the

maximum memory allocation to a queue-set.

Displays quality of service (QoS) information.

Catalyst 3750 Switch Command Reference