Show Ip Dhcp Snooping Database - Cisco Catalyst 3750-X Command Reference Manual
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show ip dhcp snooping database
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
This command is available only if your switch is running the IP services feature set.
Syntax Description
detail
Command Modes
User EXEC
Command History
Release
12.2(53)SE2
Examples
This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
OL-29704-01
show ip dhcp snooping database [detail]
(Optional) Display detailed status and statistics information.
Modification
This command was introduced.
:
:
:
:
0
Startup Failures :
0
Failed Transfers :
0
Failed Reads
:
0
Failed Writes
:
0
Catalyst 3750-X and 3560-X Switch Command Reference
show ip dhcp snooping database
0
0
0
0
2-673
Advertisement
Table of Contents
