Verifying Package Contents - Cisco Catalyst 2960 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Preparing for Installation
Verifying Package Contents
This section does not apply to the Catalyst 2960-8TC, 2960G-8TC, and 2960PD-8TT-L switches. For
information applicable to those switches, see
Carefully remove the contents from the shipping container, and look at each item for damage. If any item
is missing or damaged, contact your Cisco representative or reseller for support. Return all packing
material to the shipping container, and save it.
The switch is shipped with these items:
•
•
•
•
•
The Catalyst 2960-8TC-L, 2960G-8TC-L, 2960-24-S, 2960-24TC-S, and 2960-48TC-S switches do not
Note
have an RPS connector.
You can use the cable guide to manage a large number of cables in a rack. This is a different part than
the cable guard, which you use to secure cables to the front of the switch and prevent them from being
accidentally removed on the Catalyst 2960-8TC, 2960G-8TC, and 2960PD-8TT-L switches.
Catalyst 2960 Switch Hardware Installation Guide
2-6
Documentation CD that includes:
Catalyst 2960 Switch Getting Started Guide
–
Catalyst 2960 Switch Getting Started Guide (8-Port Switches)
–
–
Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
Regulatory Compliance and Safety Information for the Catalyst 2960 Switch (printed guide that
contains only German warnings)
AC power cord (AC-powered switches)
One RJ-45-to-DB-9 adapter cable
Mounting kit that contains:
Four rubber feet for mounting the switch on a table
–
Two 19-inch rack-mounting brackets (also used for wall mounting)
–
Six Phillips flat-head screws for attaching the brackets to the switch
–
Four Phillips machine screws for attaching the brackets to a rack
–
One cable guide and one black Phillips machine screw for attaching the cable guide to one of
–
the mounting brackets
One redundant power system (RPS) connector cover
–
Two Phillips pan-head screws (for attaching the RPS cover)
–
Four Phillips truss-head screws (for wall-mounting brackets)
–
Chapter 2
Switch Installation (24- and 48-Port Switches)
Chapter 3, "Switch Installation (8-Port Switches)."
OL-7075-05
Advertisement
Table of Contents
