Cisco 300 Series Cli Manual page 1092

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Voice VLAN Commands

OL-32830-01 Command Line Interface Reference Guide

Using this command with the type parameter displays the voice VLAN parameters

relevant to the type selected. The the local and agreed voice VLAN settings are

displayed only if this is the current voice VLAN state.

The interface-id parameter is relevant only for the OUI VLAN type.

The following examples display the output of this command in various

configurations.

Example 1—Displays the auto voice VLAN parameters (this is independent of the

voice VLAN state actually enabled).

switch>show voice vlan type auto

switchxxxxxx# show voice vlan type auto

Best Local Voice VLAN-ID is 5

Best Local VPT is 5 (default)

Best Local DSCP is 46 (default)

Agreed Voice VLAN is received from switch 00:24:01:30:10:00

Agreed Voice VLAN priority is

Agreed Voice VLAN-ID is 5

Agreed VPT is 5

Agreed DSCP is 46

Agreed Voice VLAN Last Change is 11-Jul-11 15:52:51

switchxxxxxx#

Example 2—Displays the current voice VLAN parameters when the voice VLAN state

is auto-enabled.

switch>show voice vlan

Administrate Voice VLAN state is auto-enabled on IPv4

Operational Voice VLAN state is auto-enabled

Best Local Voice VLAN-ID is 5

Best Local VPT is 5 (default)

Best Local DSCP is 46 (default)

Agreed Voice VLAN is received from switch 00:24:01:30:10:00

0 (active static source)