Macro Auto Smartport (Interface) - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Smartport Commands

OL-32830-01 Command Line Interface Reference Guide

If the Auto Smartport Administrative state is controlled, the Auto Smartport

Operational state is managed by the Voice VLAN manager and is set as follows:

Auto Smartport Operational state is disabled when the OUI Voice VLAN is

Auto Smartport Operational state is enabled when the Auto Voice VLAN is

A user cannot enable Auto Smartport globally if the OUI Voice VLAN is enabled.

This example shows an attempt to enable the Auto Smartport feature globally in

the controlled mode. This is not possible because the OUI voice feature is

enabled. The voice VLAN state is then disabled, after which Auto Smartports can

be enabled. The appropriate VLANs are automatically enabled because the ports

are configured for Auto Smartports on these VLANs.

switchxxxxxx(config)#

Auto smartports cannot be enabled because OUI voice is enabled.

switchxxxxxx(config)#

10-Apr-2011 16:11:31 %LINK-I-Up:

10-Apr-2011 16:11:33 %LINK-I-Up:

44.2 macro auto smartport (Interface)

The macro auto smartport Interface Configuration mode command enables the

Auto Smartport feature on a given interface. The no format of the command

disables the feature on the interface.

macro auto controlled

macro auto enabled

voice vlan state disabled

macro auto enabled