Logging Packet Drop - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

IPv6 First Hop Security

OL-32830-01 Command Line Interface Reference Guide

enable—Enables logging of Binding table main events. If no keyword is

configured, this keyword is applied by default.

disable—Disables logging of Binding table main events.

Default Configuration

Policy attached to port or port channel: the value configured in the policy attached

to the VLAN.

Policy attached to VLAN: global configuration.

Command Mode

Neighbor Binding Policy Configuration mode.

User Guidelines

If this command is part of a policy attached to a VLAN, it is applied to all the ports

in the VLAN. If it is defined in a policy attached to a port in the VLAN, this value

overrides the value in the policy attached to the VLAN.

The following example enables logging of Binding table main events within the

IPv6 Neighbor Binding policy named policy1:

switchxxxxxx(config)#

switchxxxxxx(config-nbr-binding)#

25.53 logging packet drop

To enable the logging of dropped packets within an IPv6 First Hop Security policy,

use the logging packet drop command in IPv6 First Hop Security Policy

Configuration mode. To return to the default, use the no form of this command.

logging packet drop [enable | disable]

no logging packet drop

ipv6 neighbor binding policy policy1

logging binding enable