Cisco IE 3000 Hardware Installation Manual page 143

Hide thumbs Also See for IE 3000:

Table of Contents

Appendix B

Installation In a Hazardous Environment

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special

precautions to ensure that the system remains stable. The following guidelines are provided to

ensure your safety:

•

Note

The 19-inch rack adapter is not intended for application in an industrial environment and therefore it will

not meet the environmental performance specifications for the Cisco IE 3000 switch.

To install the switch in a rack, follow these steps:

Use the four Phillips machine screws to securely attach the brackets to the rack. See

Step 1

Figure B-25

Installing the DIN Rail on the Rack

Follow the steps described in the

Step 2

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest

component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in

the rack.

Statement 1006

"Installing the Switch on a DIN Rail" section on page

Cisco IE 3000 Switch Hardware Installation Guide

Installing the Switch

Figure

B-25.

B-30.

B-37

Table of Contents

Show Quick Links

Table of Contents