Cisco IE 3000 Hardware Installation Manual page 148
Hide thumbs
Also See for IE 3000:
- Software configuration manual (760 pages) ,
- Hardware installation manual (170 pages) ,
- Getting started manual (32 pages)
Table of Contents
Advertisement
Connecting Power and Alarm Circuits
Use a ratcheting torque flathead screwdriver to torque the power and relay connector captive screw
Step 4
(above the installed wire leads) to 2.2 in-lb (0.25 Nm). See
Do not over-torque the power and relay connector captive screws. The torque should not exceed 2.2 in-lb
Caution
(0.25 Nm).
Figure B-29
Repeat
Step 5
into the second power and relay connector.
Cisco IE 3000 Switch Hardware Installation Guide
B-42
Torquing the Power and Relay Connector Captive Screws
Step 1
through
Step 4
to insert the input and output wires of an additional external alarm device
Appendix B
Installation In a Hazardous Environment
Figure B-29
for details.
- Quick Links:
- Power Converter (Optional)
Hide quick links:
Advertisement
Table of Contents
