Appendix; Configuring The Switch With The Cli-Based Setup Program; Accessing The Cli From The Console Port - Cisco IE 3000 Hardware Installation Manual
Hide thumbs
Also See for IE 3000:
- Software configuration manual (760 pages) ,
- Hardware installation manual (170 pages) ,
- Getting started manual (32 pages)
Table of Contents
Advertisement
Configuring the Switch with the CLI-Based Setup
Program
This appendix provides a command-line interface (CLI)-based setup procedure for a standalone switch.
For information about setting up the switch by using Express Setup, see the Cisco IE 3000 Switch
Getting Started Guide.
Before connecting the switch to a power source, review the safety warnings in
Installation."
For installation procedures for mounting your switch, connecting to the switch ports, or connecting to
the small form-factor pluggable (SFP) modules, see
Accessing the CLI from the Console Port
You can access the CLI on a configured or unconfigured switch by connecting the console port of the
switch to your PC or workstation and accessing the switch through a terminal emulation program.
To connect to the console port, follow these steps:
1.
2.
3.
4.
5.
Using the supplied RJ-45-to-DB-9 adapter cable, insert the RJ-45 connector into the console port on
the switch front panel
(Figure
Start the terminal-emulation program on the PC or terminal. The terminal-emulation software,
frequently a PC application such as Hyperterminal or ProcommPlus, makes communication between
the switch and your PC or terminal possible.
Start a terminal-emulation session.
Configure the baud rate and character format of the PC or terminal to match these console port
default characteristics:
9600 bits per second
–
8 data bits
–
1 stop bit
–
No parity
–
None (flow control)
–
Power on the switch as described in the switch getting started guide and in the
Operation" section on page
A P P E N D I X
Chapter 2, "Switch Installation."
1-1) and to the PC or terminal port.
2-13.
Cisco IE 3000 Switch Hardware Installation Guide
D
Chapter 2, "Switch
"Verifying Switch
D-1
- Quick Links:
- Power Converter (Optional)
Hide quick links:
Advertisement
Table of Contents
