Table of Contents
Advertisement
50
1003
Syntax
rate-limit
committed-rate-kbps
no rate-limit
Parameters
•
committed-rate-kbps
second of ingress traffic on a port. The range is 3–maximal port speed.
•
committed-burst-bytes
burst
3000–19173960). If unspecified, defaults to 128K.
Default Configuration
Rate limiting is disabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
The Rate Limit does not calculate traffic controlled by Storm control. The real
allowed rate will be sum of the rate specified by the command and the rates
specified by the Storm control commands for particular traffic types.
Example
The following example limits the incoming traffic rate on gi11 to 150,000 kbps.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# rate-limit 150000
50.3 rate-limit vlan
To limit the incoming traffic rate for a VLAN in, use the rate-limit vlan command in
Global Configuration mode. To disable the rate limit, use the no form of this
command.
Rate Limit and Storm Control Commands
[burst
committed-burst-bytes
—Specifies the maximum number of kilobits per
—(Optional) The burst size in bytes. (Range:
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
]
Advertisement
Table of Contents
