Table of Contents
Advertisement
Rate Limit and Storm Control Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Syntax
rate-limit vlan
vlan-id committed-rate
no rate-limit vlan
vlan-id
Parameters
•
vlan-id
—Specifies the VLAN ID.
•
committed-rate
(kbps). (Range: 3-57982058)
•
burst
committed-burst
in bytes. (Range: 3000–19173960). If unspecified, defaults to 128K.
Default Configuration
Rate limiting is disabled.
Command Mode
Global Configuration mode
User Guidelines
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
Traffic policing in a policy map takes precedence over VLAN rate limiting. If a
packet is subject to traffic policing in a policy map and is associated with a VLAN
that is rate limited, the packet is counted only in the traffic policing of the policy
map.
It does not work in conjunction with IP Source Guard.
Example
The following example limits the rate on VLAN 11 to 150000 kbps or the normal
burst size to 9600 bytes.
switchxxxxxx(config)# rate-limit vlan 11 150000 burst 9600
[burst
—Specifies the average traffic rate (CIR) in kbits per second
—(Optional) Specifies the maximum burst size (CBS)
committed-burst-bytes
50
]
1004
Advertisement
Table of Contents
