Table of Contents
Advertisement
Remote Network Monitoring (RMON) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
•
type {absolute | delta}—(Optional) Specifies the method used for sampling
the selected variable and calculating the value to be compared against the
thresholds. The possible values are:
-
absolute—Specifies that the selected variable value is compared
directly with the thresholds at the end of the sampling interval.
-
delta—Specifies that the selected variable value of the last sample is
subtracted from the current value, and the difference is compared with
the thresholds.
•
startup {rising | rising-falling | falling}—(Optional) Specifies the alarm that
may be sent when this entry becomes valid. The possible values are:
-
rising—Specifies that if the first sample (after this entry becomes valid)
is greater than or equal to rising-threshold, a single rising alarm is
generated.
-
rising-falling—Specifies that if the first sample (after this entry becomes
valid) is greater than or equal to
generated. If the first sample (after this entry becomes valid) is less than
or equal to falling-threshold, a single falling alarm is generated.
-
falling —Specifies that if the first sample (after this entry becomes valid)
is less than or equal to falling-threshold, a single falling alarm is
generated.
•
name
owner
—(Optional) Specifies the name of the person who configured
this alarm. (Valid string)
Default Configuration
The default method type is absolute.
The default startup direction is rising-falling.
If the owner name is not specified, it defaults to an empty string.
Command Mode
Global Configuration mode
Example
The following example configures an alarm with index 1000, MIB object ID D-Link,
sampling interval 360000 seconds (100 hours), rising threshold value 1000000,
rising-threshold
, a single rising alarm is
51
1012
Advertisement
Table of Contents
