Table of Contents
Advertisement
Network Management Protocol (SNMP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
encrypted snmp-server user
{md5 | sha} encrypted-auth-password [priv encrypted-priv-password]]}
no snmp-server user
Parameters
•
username—Define the name of the user on the host that connects to the
agent. (Range: Up to 20 characters).
•
groupname—The name of the group to which the user belongs. The group
should be configured using the command
parameters (no specific order of the 2 command configurations is imposed
on the user). (Range: Up to 30 characters)
•
v1—Specifies that the user is a v1 user.
•
v2c—Specifies that the user is a v2c user..
•
v3—Specifies that the user is a v3 user..
•
host
remote
—(Optional) IP address (IPv4, IPv6 or IPv6z) or host name of the
remote SNMP host. See
•
auth—(Optional) Specifies which authentication level is to be used.
•
md5—(Optional) Specifies the HMAC-MD5-96 authentication level.
•
Sha—(Optional) Specifies the HMAC-SHA-96 authentication level.
•
auth-password—(Optional) Specifies the authentication password. Range:
Up to 32 characters.
•
encrypted-auth-password—(Optional) Specifies the authentication
password in encrypted format.
•
priv-password—(Optional) Specifies the privacy password (The
encryption algorithm used is data encryption standard - DES). Range: Up to
64 characters.
•
encrypted-priv-password—(Optional) Specifies the privacy password in
encrypted format.
Default Configuration
No group entry exists.
username groupname {v1 | v2c | [
username {v1 | v2c | [remote host] v3[
IPv6z Address
remote
{md5 | sha}
auth
snmp-server group
Conventions.
43
host] v3[
auth
with v1 or v2c
868
Advertisement
Table of Contents
