Table of Contents
Advertisement
43
875
•
port
udp-port
—(Optional) UDP port of the host to use. The default is 162.
(Range: 1–65535)
•
filtername
filter
filtered. The filter is defined using snmp-server filter (no specific order of
commands is imposed on the user). (Range: Up to 30 characters)
•
seconds
timeout
for an acknowledgment before resending informs. The default is 15
seconds. (Range: 1–300)
•
retries
retries
—(Optional) (For informs only) Maximum number of times to
resend an inform request, when a response is not received for a generated
message. The default is 3. (Range: 0–255)
Default Configuration
Version: SNMP V1
Type of notification: Traps
udp-port: 162
If informs are specified, the default for retries: 3
Timeout: 15
Command Mode
Global Configuration mode
User Guidelines
The logical key of the command is the list (ip-address/hostname, traps/informs,
version).
When configuring SNMP v1 or v2 notifications recipient, the software
automatically generates a notification view for that recipient for all MIBs.
For SNMPv3 the software does not automatically create a user or a notify view.
, use the commands snmp-server user (ISCLI) and snmp-server group to create a
user or a group.
Example
The following defines a host at the IP address displayed.
Network Management Protocol (SNMP) Commands
—(Optional) Filter for this host. If unspecified, nothing is
—(Optional) (For informs only) Number of seconds to wait
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
