Table of Contents
Advertisement
49
983
Syntax
radius server nas secret key
radius server nas secret
encrypted radius server nas secret key
no radius server nas secret [default |
Parameters
•
key
—Specifies the authentication and encryption key for communications
between the device and users of the given group. (Range: 0–128
characters)
•
encrypted-key
encrypted form.
•
default—Specifies the default secret key that will be applied to
communicate with NASs that do not have a private key.
•
ip-address
—Specifies the RADIUS client host IP address. The IP address
can be an IPv4, IPv6 or IPv6z address.
Default Configuration
The secret key does not exist.
Command Mode
Global Configuration mode
User Guidelines
Use the radius server nas secret key
will be applied to communicate with NASs that do not have a private key.
Use the radius server nas secret key
that will be applied to communicate with the specified NAS.
Use the radius server nas secret
secret key will be applied to communicate with the specified NAS.
If a NAS is not defined by this command all messages received from this NAS will
be dropped.
The Radius server supports up to 50 NASs.
Use the no radius server nas secret default command, to delete the default key.
key
{default |
ip-address
encrypted-key
ip-address
—Same as the key-string parameter, but the key is in
key
default command, to defines a key that
key ip-address
ip-address
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Radius Server Commands
ip-address
}
{default |
]
command, to defines a key
command, to defines that the default
ip-address
}
Advertisement
Table of Contents
