Siemens SIMATIC S7-400 Reference Manual page 354

Automation system module data

Hide thumbs Also See for SIMATIC S7-400:

Table of Contents

S5 interface IM 463-2

7.5 Setting the operating modes of the IM 314

Setting the address area

The address area of the S5 I/O modules is set on the IM 314. This setting applies only for the

digital and analog I/O modules.

The address areas P, Q, IM3, and IM4 are available. Set the switch to the relevant position to

address the digital and analog I/O modules in these areas.

P area: F000 - F0FF

Q area: F100 - F1FF

IM3 area: FC00 - FCFF

IM4 area: FD00 - FDFF

* Factory state

Settings address areas on the IM 314

I/O area address

Used in ER 701-2, ER 701-3

Switch position

O = OFF, 1 = ON

Reference Manual, Ausgabe 11/2016, A5E00850736-08

The first two switches on the left are

not relevant.

S7-400 Automation System Module Data

Show Quick Links

Table of Contents