Table of Contents
Advertisement
7.3
Sample Program (with Remote Head Module)
This section describes the sample program of RFID interface module with the remote head module.
System configuration
The following system configuration is used to describe the sample program of RFID interface module.
Master station
Station No.0
CC-Link IE Field Network
USB
GX Works3
This section describes the system configuration of the master station and intelligent device station.
Item
Master station
Intelligent device station
In the project of CPU module, network modules are added, module parameters (Required Settings/Basic
Settings) are set, and a sequence program is created.
In the project of remote head module, RFID interface modules are added and module parameters (Basic
Settings) are set.
For addition of RFID interface modules, refer to the following.
Page 31 Setting Procedure
Intelligent device station
(X1000 to X101F, and Y1000 to Y101F)
Station No.1
Amplifier
USB
GX Works3
Power supply module
CPU module
CC-Link IE Field Network module
Power supply module
CC-Link IE Field Network remote head module
RFID interface module
Amplifier
Antenna
RF tag
Antenna
Model
R61P
R04CPU
RJ71GF11-T2
R61P
RJ72GF15-T2
ER-1V680D1
V680-HA63B
V680-HS63
V680S-D2KF67
7 OPERATION PROGRAM EXAMPLE
7.3 Sample Program (with Remote Head Module)
RF tag
7
101
Advertisement
Table of Contents
Troubleshooting
