Verifying Package Contents - Cisco Catalyst 2955 Hardware Installation Manual
Cisco systems switch installation guide
Hide thumbs
Also See for Catalyst 2955:
- Installation notes (12 pages) ,
- Configuration manual (710 pages) ,
- Command reference manual (686 pages)
Table of Contents
Advertisement
Preparing for Installation
Verifying Package Contents
Note
Note
Catalyst 2955 Hardware Installation Guide
4-12
When the switch is installed in an industrial enclosure, the
Note
temperature within the enclosure is greater than normal room
temperature outside the enclosure.
The temperature inside the enclosure cannot exceed 140
the maximum ambient enclosure temperature of the switch.
Cabling is away from sources of electrical noise, such as radios, power lines,
•
and fluorescent lighting fixtures.
Carefully remove the contents from the shipping container, and check each item
for damage. If any item is missing or damaged, contact your Cisco representative
or reseller for support. Return all packing materials to the shipping container and
save them.
The switch is shipped with these items:
Catalyst 2955 Hardware Installation Guide (Cisco part number
•
DOC-7814944=)
Power and relay connector
•
Switch installation protective liner
•
•
One ferrite
One RJ-45-to-DB-9 console port adapter cable
•
To connect the switch functional ground, you need a ring terminal lug (such as
Thomas & Bett part number RC10-14 or equivalent).
If you want to connect a terminal to the switch console port, you need to provide
an RJ-45-to-DB-25 female DTE adapter. You can order a kit (part number
ACS-DSBUASYN=) with that adapter from Cisco.
Chapter 4
Installation in a Hazardous Environment
o
o
F (60
C),
78-14944-03
Hide quick links:
Advertisement
Table of Contents
