Cable And Adapter Specifications; Power And Relay Connector - Cisco Catalyst 2955 Hardware Installation Manual
Cisco systems switch installation guide
Hide thumbs
Also See for Catalyst 2955:
- Installation notes (12 pages) ,
- Configuration manual (710 pages) ,
- Command reference manual (686 pages)
Table of Contents
Advertisement
Appendix B
Connectors and Cables
Note
Console Port
Cable and Adapter Specifications
78-14944-03
You can get replacement power and relay connectors (PWR-2955-CONNECT=)
by calling Cisco Technical Support. See the
section on page
xxx.
Figure B-5
Power and Relay Connector
ALARMS
The console port uses an 8-pin RJ-45 connector. You can connect a switch to a PC
through the console port and the supplied RJ-45-to-DB-9 adapter cable. If you
want to connect a switch to a terminal, you need to provide an RJ-45-to-DB-25
female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) with
that adapter from Cisco. For console-port and adapter-pinout information, see
Table B-3
and
Table
B-4.
These sections describe the cables and adapters used with Catalyst 2955 switches.
Two Twisted-Pair Cable Pinouts, page B-6
•
Four Twisted-Pair Cable Pinouts for 10/100 Ports, page B-6
•
•
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports, page B-8
Cable and Adapter Specifications
"Obtaining Technical Assistance"
Catalyst 2955 Hardware Installation Guide
B-5
Hide quick links:
Advertisement
Table of Contents
