C H A P T E R 48 Configuring Scsi Flow Services And Statistics; Scsi Flow Configuration Client; Scsi Flow Data Path Support; Configuring Scsi Flow Services - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual
Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs
Also See for AP776A - Nexus Converged Network Switch 5020:
- Command reference manual (1640 pages) ,
- Configuration manual (1486 pages) ,
- Reference (886 pages)
Table of Contents
Advertisement
Chapter 48
Configuring SCSI Flow Services and Statistics
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
SCSI Flow Configuration Client
A SCSI flow configuration client (SFCC) resides on the CPP of the SSM. It receives flow configuration
requests from the SFM, programs the DPP corresponding to the initiator and target port interfaces, and
responds to the SFM with the status of the configuration request.
SCSI Flow Data Path Support
The DPP on the SSM examines all the messages between the initiator and target and provides SCSI flow
features such as Fibre Channel write acceleration and statistics monitoring.
Configuring SCSI Flow Services
A SCSI flow specification consists of the following attributes:
•
•
•
•
•
The SCSI flow specification is a distributed configuration because the SCSI initiator and the target might
be physically connected to SSMs on two different switches located across the fabric. The configuration
does not require information to identify either the switch name or the SSM slot location for either the
initiator or the target. The manual SCSI flow configuration is performed only at the initiator side. This
simplifies the configuration process. The initiator switch sends the configuration to the SFM on the
target switch using CFS. No SCSI flow configuration is necessary on the target switch.
Enabling SCSI Flow Services
You can enable SCSI flow services either on the entire SSM or on groups of four interfaces.
Enabling SCSI flow services on interfaces has the following restrictions:
•
•
•
Note
Fibre Channel write acceleration can only be provisioned on the entire SSM, not a group of interfaces
on the SSM.
OL-18084-01, Cisco MDS NX-OS Release 4.x
SCSI flow identifier
VSAN identifier
SCSI initiator port WWN
SCSI target port WWN
Flow feature set consisting of Fibre Channel write acceleration and statistics monitoring.
The fewest number of interfaces that you can enable is four. You can specify fc1 through fc4 but not
fc1 through fc2.
The first interface in the group must be 1, 5, 9, 13, 17, 21, 25, or 29. You can specify fc5 through
fc8 but not fc7 through fc10.
The groups of four interfaces do not need to be consecutive. You can specify fc1 through fc8 and
fc17 through fc20.
Cisco MDS 9000 Family CLI Configuration Guide
SCSI Flow Services
48-3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
