Table of Contents
Advertisement
Resolving Error and Warning Messages
Table 7-7
Network and System Errors and Warnings Explanation (continued)
Error
Static IP address
conflict with
device <address>
IP address conflict
with device
<address>
Network interface
will be shut down
Server address not
configured
No TFTP server
address
Ethernet failed to
start
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
7-20
Explanation
The DPA 7630/7610 has a
static IP address that is
already assigned to another
device on the network.
The DHCP server allocated
an IP address to the
DPA 7630/7610 that is
already in use by another
device on the network.
A previous error caused the
network interface to be shut
down.
A DNS query has been
attempted, but no DNS
server has been configured.
The TFTP server has not
been set.
The Ethernet cable is not
properly connected to the
DPA 7630/7610 or to the
hub or switch.
Chapter 7
Troubleshooting the DPA 7630/7610
Action
Assign a different static IP address for either
the DPA or the conflicting device. Refer to
"Configuring Network Settings" section on
page 5-4
for details on assigning a static IP
address.
Check your DHCP server configuration
1.
to ensure that addresses allocated are not
reserved for static IP use.
2.
Check your network for misconfigured
devices.
Check the event log for earlier errors.
If the DPA 7630/7610 has a static IP
1.
address, verify the DNS server has been
configured. Refer to
Server" section on page 5-9
If you are using DHCP, the DHCP server
2.
has not provided a DNS server. Check the
DHCP server configuration.
1.
If using DHCP to obtain TFTP server,
check your DHCP server configuration.
2.
If you want to use a fixed TFTP server,
you must configure it on the
DPA 7630/7610. Refer to
TFTP Server" section on page 6-9
assign a TFTP server for details.
Check the Ethernet cable and reconnect it to
the DPA 7630/7610 and the hub or switch. If
error persists, replace cable.
"Assigning the DNS
for details.
"Assigning
to
78-11069-03
Advertisement
Chapters
Table of Contents
Troubleshooting
