Table of Contents
Advertisement
Using the Simple Integration Mode
Figure 2-2
Logical Connections of Simple Integration on the DPA 7630
Line C
(Ports 24-17)
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
2-4
DPA 7630
Connect all the ports you need in Lines A, B, and C from the DPA 7630 to the
Octel system (see
Figure
Octel ports, you can leave the remaining ports empty. On the Octel system, these
24 ports appear as 24 Definity PBX ports.
Octel
Line B
(Ports 16-9)
DPA 7630
DPA 7610
Connect all the lines you need from the telco connector on the DPA 7610 to the
Octel system (see
Figure
Octel ports, you can leave the remaining ports empty. On the Octel system, these
24 lines appear as 24 Meridian 1 PBX ports.
Chapter 2
2-2). There are 24 ports, but if you have fewer than 24
Line A
(Ports 8-1)
All 24 ports connected to Octel.
Configure some lines to handle
incoming calls, some for outgoing
calls, and some for MWI.
Do not enable incoming and
outgoing calls on the same line.
2-3). There are 24 ports, but if you have fewer than 24
Choosing an Integration Mode
78-11069-03
Advertisement
Chapters
Table of Contents
Troubleshooting
