Table of Contents
Advertisement
Connecting the DPA 7630/7610 to the Network
Connecting the DPA 7630/7610 to the Network
Connecting to the Ethernet Port
Warning
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
3-8
You must connect the DPA 7630/7610 to the other IP telephony systems in the
network, including Cisco CallManager, Octel, and Definity or Meridian 1
systems.
Review these sections before connecting the DPA 7630/7610:
•
Connecting to the Ethernet Port, page 3-8
•
Connecting to the Console Port, page 3-9
Connecting to the Telco Connectors, page 3-10
•
Use the Ethernet port to connect the DPA 7630/7610 to the IP network to access
Cisco CallManager (see
Mbps half- and full-duplex Ethernet. See the
page 5-6
for details.
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits
to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45
connectors. Use caution when connecting cables.
Figure
3-4). The DPA 7630/7610 fully supports 10/100
"Configuring Ethernet" section on
Chapter 3
Installing the DPA 7630/7610
78-11069-03
Advertisement
Chapters
Table of Contents
Troubleshooting
