Table of Contents
Advertisement
Configuring Cisco CallManager
Configuring the Virtual Port
Configuring End-User Phones
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
4-12
Table 4-5
Octel MWI Ports Configuration Settings
Field
Description
Directory Number Assign a directory number to each of these phones. Ensure
that these directory numbers are not included in the voice
mail hunt group.
Call Waiting
Disable call waiting.
Call Forwarding
Do not set
The DPA 7630/7610 automatically creates and uses the virtual port to send MWI
messages to Cisco CallManager. One virtual port is created regardless of the
number of Octel MWI ports you have. The virtual phone settings are similar to
the Octel MWI port. See
both Cisco CallManager 3.1 and 3.2.
Table 4-6
Virtual Port Configuration Settings
Field
Directory Number
Call Waiting
Call Forwarding
Although the DPA 7630/7610 does not directly interact with the end-user phones,
verify that you configured these phones properly to forward to voice mail. You
might want to divide users into different hunt groups to access the voice mail
system. See
Table 4-7
Cisco CallManager 3.1 or 3.2.
Chapter 4
Preparing the Cisco CallManager and Octel Systems
Table 4-6
for an overview of the required settings for
Description
Assign a directory number to this phone.
Disable call waiting.
Do not set
for an overview of the required settings for either
78-11069-03
Advertisement
Chapters
Table of Contents
Troubleshooting
