Table of Contents
Advertisement
Installing the Cisco VG310 and Cisco VG320 Voice Gateways
Installing the Voice Gateway on a Bench
Do not plug this unit into an AC outlet that does not have a UL-certified receptacle that is properly tied
Caution
to the building ground.
Caution
If the unit is placed on a bench top, do not stack other equipment or paper on the chassis. Provide plenty
of space for air circulation (front to back). Inadequate ventilation can result in overheating and damage.
Note
Ensure that a suitable AC power outlet is available.
1 Place the four rubber feet (from the accessory kit) in the four indentations on the underside of the chassis.
This facilitates proper airflow through and around the chassis.
2 Place the unit on a smooth, flat surface.
Installing the Ground Connection
To ground the Cisco VG310 or Cisco VG320 chassis, follow this procedure:
Before You Begin
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning
Use copper conductors only. Statement 1025
You must connect the chassis to a reliable earth ground; the ground wire must be installed in accordance with
local electrical safety standards.
• For NEC-compliant grounding, use size AWG 14 (2 mm
• For EN/IEC 60950-compliant grounding, use size AWG 18 (1 mm
Procedure
Step 1
Locate a suitable ground location.
OL-31292-01
ring terminal.
user-supplied ring terminal.
2
) or larger wire and an appropriate user-supplied
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
Installing the Voice Gateway on a Bench
2
) or larger wire and an appropriate
33
Hide quick links:
Advertisement
Table of Contents
