Table of Contents
Advertisement
Remote Terminal Connections (If Applicable)
Voice Gateway Port
Auxiliary
Gigabit Ethernet
Analog voice
multiport
Remote Terminal Connections (If Applicable)
If you are configuring a voice gateway from a remote location, connect the modem and the remote PC or
terminal to the telephone network as described in this section.
Connecting to a Modem
To connect the local modem and the remote modem to live telephone outlets, use standard telephone cables.
Connecting to a Remote PC
Before You Begin
The remote PC must be running terminal emulation software.
Note
Procedure
Step 1
Connect the remote PC to the modem.
Step 2
Set the PC terminal emulation software requirements as follows:
• 9600 baud
• 8 data bits
• 1 stop bit
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
48
Port Color
Connector/Cable
Black
RJ-45/Rollover
Yellow
RJ-45/Gigabit
Ethernet
Gray
RJ-21X/
50-conductor
Installing the Cisco VG310 and Cisco VG320 Voice Gateways
Interface To
Modem
LAN
Distribution panel
for analog
telephone, fax,
PBX, or central
office line
Pinout Information
Auxiliary Port
Signals and
Pinouts, on page
71
Gigabit Ethernet
Connector Pinouts
(RJ-45), on page
73
Analog Voice RJ-21
Pinouts, on page
77
OL-31292-01
Hide quick links:
Advertisement
Table of Contents
