Table of Contents
Advertisement
Installing the Cisco VG310 and Cisco VG320 Voice Gateways
• When you make the settings for the DC source voltage, you must consider the voltage drops between
the DC power supply and the DC input connector on Cisco VG310 or Cisco VG320. To ensure optimal
performance, the input voltage at the DC input connector should not be less than 11.5 V.
• Use a battery of higher capacity if you require longer periods of battery operation (for example, up to 8
hours).
• If you use a battery of high capacity or a high-capacity DC source to power the chassis, install an external
fuse for protection against fault and fire.
Power Connector for the DC Power Supply
The Cisco VG310 and Cisco VG320 analog voice gateways support the Molex Mini-Fit Jr. 5557 Series,
8-circuit dual-row, +12V DC power connector (Molex P/N 39-01-2085). The +12V DC power input is designed
to be used with an external UPS system, and it has status signals that are reported to Cisco VG310 or Cisco
VG320.
The following table shows the connector pin assignment for the +12V DC power connector pin assignment.
Table 9: +12V DC Connector Pin Assignment
Pin
1
2
3
4
5
6
7
8
OL-31292-01
Direction
Description
Input
Enable (tie low)
Input
+12V (power)
Output
REP_BAT (tie
low)
Input
GND (power
return)
Output
ON_BAT (tie low)
Input
+12V (power)
Output
LOW_BAT (tie
low)
Input
GND (power
return)
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
Connecting the Chassis to a +12V DC Power Supply
SW Register
Definition
0x4A80_0038
—
—
—
—
Bit 6:
Battery Missing:
REP_MIS_BAT
Fail 1 = missing
Fail 0 = good
—
—
Bit 4: BAT_ON
Battery on/off:
Status 1 = off
Status 0 = on
—
—
Bit 5: BAT_LOW
Battery power:
Level status 1 = low
Level status 0 = okay
—
—
39
Hide quick links:
Advertisement
Table of Contents
