Macro Auto Persistent - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Smartport Commands

This command has no arguments or keywords.

Default Configuration

Command Mode

Interface (Ethernet, Port Channel) Configuration mode

User Guidelines

When a Smartport macro fails at an interface, the Smartport type of the interface

becomes Unknown. You must diagnose the reason for the failure on the interface

and/or Smartport macro, and correct the error. Before you or Auto Smartport are

allowed to reapply the desired Smartport macro, you must reset the interface

macro auto resume

command, which changes the Smartport type of the

interface to default.Then you can run the

macro auto trunk refresh

Changes the Smartport type from unknown to default and resumes the Smartport

feature on port 1.

switchxxxxxx(config)#

interface gi11

switchxxxxxx(config-if)#

macro auto resume

44.5 macro auto persistent

The macro auto persistent Interface Configuration mode command sets the

interface as a Smartport persistent interface. The no format of the command

returns it to default.

macro auto persistent

no macro auto persistent

This command has no arguments or keywords.

OL-32830-01 Command Line Interface Reference Guide