Cisco 300 Series Cli Manual page 877

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

—(Optional) UDP port of the host to use. The default is 162.

(Range: 1–65535)

filtered. The filter is defined using snmp-server filter (no specific order of

commands is imposed on the user). (Range: Up to 30 characters)

for an acknowledgment before resending informs. The default is 15

seconds. (Range: 1–300)

—(Optional) (For informs only) Maximum number of times to

resend an inform request, when a response is not received for a generated

message. The default is 3. (Range: 0–255)

Default Configuration

Version: SNMP V1

Type of notification: Traps

udp-port: 162

If informs are specified, the default for retries: 3

Command Mode

Global Configuration mode

User Guidelines

The logical key of the command is the list (ip-address/hostname, traps/informs,

When configuring SNMP v1 or v2 notifications recipient, the software

automatically generates a notification view for that recipient for all MIBs.

For SNMPv3 the software does not automatically create a user or a notify view.

, use the commands snmp-server user (ISCLI) and snmp-server group to create a

user or a group.

The following defines a host at the IP address displayed.

Network Management Protocol (SNMP) Commands

—(Optional) Filter for this host. If unspecified, nothing is

—(Optional) (For informs only) Number of seconds to wait

OL-32830-01 Command Line Interface Reference Guide