Power Inline Limit-Mode; Show Power Inline - Cisco 300 Series Cli Manual

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

The following example sets inline power on a port.

switchxxxxxx(config)# interface gi1

switchxxxxxx(config-if)# power inline limit 2222

power inline limit-mode

Use the power inline limit-mode Global Configuration mode command to set the

power limit mode of the system. Use the no form of this command to return to

power inline limit-mode

no power inline limit-mode

class—The power limit of a port is based on the class of the PD (Power

Device) as detected during the classification process

port—The power limit of a port is fixed regardless of the class of the

discovered PD.

Command Mode

Global Configuration mode

The following example sets the power limit to class.

switchxxxxxx(config)# power inline limit-mode class

Use the show power inline EXEC mode command to display information about the

inline power for all interfaces or for a specific interface.

{class | port}

78-21075-01 Command Line Interface Reference Guide

Power over Ethernet (PoE) Commands