Qos Advanced-Mode Trust - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide
Examples
Example 1 - The following example enables QoS basic mode on the device.
switchxxxxxx(config)#
Example 2 - The following example enables QoS advanced mode on the device
with the ports-not-trusted option.
switchxxxxxx(config)#
49.2
qos advanced-mode trust
Use the qos advanced-mode trust Global Configuration command to configure the
trust mode in advanced mode. Use the no form of this command to return to
default.
Syntax
qos advanced-mode trust {
no qos advanced-mode trust
Parameters
•
cos—Classifies ingress packets with the packet CoS values. For untagged
packets, the port default CoS is used.
•
dscp—Classifies ingress packets with the packet DSCP values.
•
cos-dscp—Classifies ingress packets with the packet DSCP values for IP
packets. For other packet types, use the packet CoS values.
Default Configuration
cos-dscp
Command Mode
Global Configuration
User Guidelines
The configuration is relevant for advanced mode in the following cases:
qos
qos advanced
cos
dscp
cos-dscp
|
|
}
49
795
Advertisement
Table of Contents
