Port Security Max - Cisco 300 Series Cli Manual

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

Address Table Commands

switchxxxxxx(config-if)port security mode lock

switchxxxxxx(config-if)port security

switchxxxxxx(config-if)exit

29.24 port security max

Use the port security max Interface Configuration (Ethernet, Port-channel) mode

command to configure the maximum number of addresses that can be learned on

the port while the port is in port, max-addresses or secure mode. Use the no form

of this command to restore the default configuration.

port security max

no port security max

max-addr—Specifies the maximum number of addresses that can be learned on

the port. (Range: 0–256)

Default Configuration

This default maximum number of addresses is 1.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

The command may be used only when the interface in the regular (non-secure

with unlimited MAC learning) mode.

Use this command to change the default value before the

port security

The following example sets the port to limited learning mode:

switchxxxxxx(config)#

interface gi7

switchxxxxxx(config-if)

port security mode max

78-21075-01 Command Line Interface Reference Guide