Show Voice Vlan - Cisco 300 Series Cli Manual

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

Voice VLAN Commands

78-21075-01 Command Line Interface Reference Guide

Default Configuration

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

This command is applicable only if the voice VLAN state is globally configured as

OUI voice VLAN (using

The port is added to the voice VLAN if a packet with a source MAC address OUI

address (defined by

VLAN ID does not have to be the voice VLAN, it can be any VLAN.

The port joins the voice VLAN as a tagged port.

If the time since the last MAC address with a source MAC address OUI address

was received on the interface exceeds the timeout limit (configured by

aging-timeout), the interface is removed from the voice VLAN.

The following example enables OUI voice VLAN configuration on gi2.

switchxxxxxx(config)#

switchxxxxxx(config-if)#

33.11 show voice vlan

Use the show voice vlan EXEC mode command to display the voice VLAN status

for all interfaces or for a specific interface if the voice VLAN type is OUI.

show voice vlan [type {

type oui—Common and OUI-voice-VLAN specific parameters are

type auto—Common and Auto Voice VLAN-specific parameters are

oui-table) is trapped on the port. Note: The packet

interface gi2

voice vlan enable

interface-id | detailed