Qos Map Dscp-Queue - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
49
826
Command Mode
Global Configuration mode.
User Guidelines
The original DSCP value and policed-DSCP value must be mapped to the same
queue in order to prevent reordering.
Example
The following example marks incoming DSCP value 3 as DSCP value 5 on the
policed-DSCP map.
switchxxxxxx(config)#
49.30 qos map dscp-queue
Use the qos map dscp-queue Global Configuration mode command to configure
the DSCP to CoS map. Use the no form of this command to restore the default
configuration.
Syntax
qos map dscp-queue
no qos map dscp-queue [
Parameters
•
dscp-list—Specifies up to 8 DSCP values, separated by spaces. (Range: 0–
63)
•
queue-id—Specifies the queue number to which the DSCP values are
mapped.
Default Configuration
.
The default map for 4 queues is as follows.
DSCP value
Queue-ID
qos map policed-dscp
dscp-list
queue-id
to
dscp-list
]
0-15
16-23
24-39, 48-63
1
2
3
78-21075-01 Command Line Interface Reference Guide
Quality of Service (QoS) Commands
3
to
5
40-47
4
Advertisement
Table of Contents
