Cisco Catalyst 2950 Command Reference Manual page 406

Hide thumbs Also See for Catalyst 2950:

Table of Contents

show mls qos interface

This is an example of output from the show mls qos interface command when pass-through mode is

configured on an interface:

Switch> show mls qos interface fastethernet0/2

FastEthernet0/2

trust state:not trusted

trust mode:not trusted

COS override:dis

default COS:0

pass-through:dscp

This is an example of output from the show mls qos interface-id policers command:

Switch> show mls qos interface fastethernet0/1 policers

FastEthernet0/1

policymap=pmtimerin

type=Single rate=1000000, burst=4096

type=Single rate=2000000, burst=4096

Related Commands

mls qos trust

Catalyst 2950 and Catalyst 2955 Switch Command Reference

Defines the default class of service (CoS) value of a port or assigns the

default CoS to all incoming packets on the port.

Defines the class of service (CoS)-to-Differentiated Services Code Point

(DSCP) map and DSCP-to-CoS map.

Configures the port trust state. Ingress traffic can be trusted and

classification is performed by examining the CoS or DSCP value.

Catalyst 2950 and 2955 Cisco IOS Commands

Catalyst 2955