hit counter script

Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 202

Voice interworking service module release 3.0
Table of Contents

Advertisement

clrrtpcnt
clrrtpcnt
To clear the Real-Time Transport Protocol (RTP) counters (statistics) for a specific static RTP
connection, as shown by the dsprtpcnt command, use the clrrtpcnt command in the VoIP
switching/trunking operating mode.
Syntax Description
conn-num
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the RTP counters for static RTP connection number 49 are cleared:
clrrtpcnt 49
Related Commands
Command
addlapdtrunk
addrtpcon
addrudptrunk
cnflapdtrunkpvc
cnflntrunkcond
cnfrtpcon
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
dellapdtrunk
delrtpcon
delrudptrunk
dsplapd
dsplapdtrunkpvc
dsplapdtrunks
dsprtpcnt
dsprtpcon
dsprtpconnstat
Cisco VISM Installation and Configuration Guide
5-58
clrrtpcnt conn-num
Connection identification number. It can be in the range from 1 to 248.
Description
Adds an LAPD trunk to a specific VISM card line.
Adds a static RTP VoIP trunking connection.
Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
Assigns the PVC trunk type that carries LAPD messages for the current VISM
card.
Enables or disables line conditioning on a VISM card line if a network alarm is
encountered.
Modifies an existing static RTP VoIP trunking connection.
trunk for a specified session.
Deletes an LAPD configured line.
Deletes a static RTP VoIP trunking connection.
Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
Displays data about an LAPD.
Displays the assigned PVC trunk type that carries LAPD trunk messages for the
current VISM card.
Displays the configuration data of all LAPD trunks.
Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
Displays the configuration data of a specific static RTP VoIP trunking
connection.
Displays the RTP connection statistics for a specified endpoint.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vism 3.0

Table of Contents

Save PDF