Table of Contents
Advertisement
Chapter 6
Troubleshooting Tips
Refer to the Cisco MGX 8000 Series platform command reference guides for more information on
Note
PXM commands.
VISM Display Card CLI Command
Use the VISM dspcd command to display the following types of information about your current VISM
card:
•
•
•
•
The following example shows the results of a typical dspcd command:
NODENAME.1.3.VISM8.a > dspcd
ModuleSlotNumber:
FunctionModuleState:
FunctionModuleType:
FunctionModuleSerialNum:
FunctionModuleHWRev:
FunctionModuleFWRev:
FunctionModuleResetReason: ?
LineModuleType:
LineModuleState:
mibVersionNumber:
configChangeTypeBitMap:
pcb part no - (800 level): 800-04399-01
pcb part no - (73 level):
Fab Part no - (28 level):
PCB Revision:
Daughter Card Information:
Daughter Card Serial Number: SAK0331003P
pcb part no - (73 level):
Fab Part no - (28 level):
PCB Revision:
PXM Display Log CLI Command
Use the PXM dsplog command to display useful information for troubleshooting your VISM card. The
log is maintained by the PXM. A VISM entry is displayed in the log in the following format:
•
•
•
•
•
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
State of the VISM card
Type of VISM card
Version number and part numbers
Daughter card version numbers and part numbers
Date and time of the log
Slot number of the VISM card from which a message is logged
The process on the VISM card that logged that message
Severity of the message:
1 = Fatal error which causes the card to reboot
–
6 = All other errors
–
A log message description
VISM and PXM Display, Log, and Diagnostic Loopback Path CLI Commands
17
Active
VISM-8T1
SAK0331006P
0.0
2.0.0_11Nov01_2
LM-RJ48-8T1
Present
21
CardCnfChng, LineCnfChng
73-03618-01
28-02791-01
08
73-03722-01
28-02905-01
04
Cisco VISM Installation and Configuration Guide
6-3
Advertisement
Table of Contents
