Table of Contents
Advertisement
Chapter 5
CLI Commands
dspsrcppeers
To display the peer configuration data for all known Simple Resource Control Protocol (SRCP) peers
(call agents), use the dspsrcppeers command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data for all known SRCP peers (call agents) are
displayed:
dspsrcppeers
Related Commands
Command
dspsrcpcnt
dspsrcpcnts
dspsrcppeer
dspsrcpport
dspsrcpretry
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspsrcppeers
Description
Displays the SRCP message counters (statistics) for a specified call agent.
Displays SRCP message counters (statistics) for all known call agents.
Displays the peer configuration data for a specified SRCP peer (call agent).
Displays the local UDP port number used by the SRCP on VISM.
Displays the card level SRCP retransmission parameters—maximum number
of retransmission attempts, minimum timeout, and maximum timeout.
Cisco VISM Installation and Configuration Guide
dspsrcppeers
5-433
Advertisement
Table of Contents
