Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfvoiptimerparam
To configure the holdover time for voice activity detection (VAD) before silence compression is
activated, use the cnfvoiptimerparam command in the VoIP switching/trunking operating mode.
Syntax Description
vad-timer
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the VAD holdover timer is configured for 360 ms:
cnfvoiptimerparam
Related Commands
Command
cnfvoiptransparams
dspvoipparams
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfvoiptimerparam vad-timer
The VAD holdover timer (defined in milliseconds) in the range from 250 to
65535.
360
Description
Configures the VoIP transportation parameters.
Displays the VoIP switching/trunking operating mode parameters.
Cisco VISM Installation and Configuration Guide
cnfvoiptimerparam
5-231
Advertisement
Table of Contents
