Table of Contents
Advertisement
Chapter 5
CLI Commands
dspcalea
To display the Communications Assistance for Law Enforcement Act (CALEA) feature configuration
status of the current VISM card, use the dspcalea command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the CALEA feature is enabled on the current VISM card:
dspcalea
CALEA: enable
Related Commands
Command
addcon
cnfcalea
cnfcon
dspvismparam
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcalea
Description
Adds a PVC connection between a VISM card and any SM or PXM card.
Enables or disables the CALEA feature on the current VISM card.
Configures a connection between a VISM card and an MGX 8000 Series
platform PXM card.
Displays the current VISM card configuration.
Cisco VISM Installation and Configuration Guide
dspcalea
5-305
Advertisement
Table of Contents
