Table of Contents
Advertisement
dspslipcnt
dspslipcnt
To display the current clock slip counters for a specified VISM card line, use the dspslipcnt command
in the VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC,
AAL2 trunking, VoIP and switched ATM AAL1 SVC trunking operating modes.
Syntax Description
line-num
Command Modes
VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the current clock slip counters for line 3 of the current VISM card are
displayed:
dspslipcnt 3
Line 3 Slip Counters:
Uncontrolled Slip:
Frame Slip:
Related Commands
Command
clrslipcnt
Cisco VISM Installation and Configuration Guide
5-428
dspslipcnt line-num
Line number of the DS1 line for which you want to display the current clock slip
counters. It can be in the range from 1 to 8.
Tx Slip
0
0
Description
Clears current clock slip counters for a specified VISM card line.
Rx Slip
0
2
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
CLI Commands
Advertisement
Table of Contents
