Table of Contents
Advertisement
Chapter 5
CLI Commands
deltoneplan
To delete a provisional tone plan from the system, use the deltoneplan command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
tonep-region
tonep-version
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
If the tone plan you want to delete is assigned to a VISM card line, you cannot delete the tone plan. Use
the dellntoneplan command to remove a tone plan assignment from a VISM card line.
This command does not delete the tone plan file from the TFTP server, which allows you to use the
addtoneplan command to add the tone plan back into the system, as needed.
Note
You cannot delete built-in tone plans from the system with this command.
Examples
The following example shows that the tone plan identified by the tone plan region name singapore and
tone plan version number 11 is deleted from the current VISM card:
deltoneplan singapore 11
Related Commands
Command
addtoneplan
cnflnringback
cnflntoneplan
cnflntonetimeout
dellntoneplan
dsplnringback
dsplntoneplan
dsplntonetimeout
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
deltoneplan tonep-region tonep-version
Tone plan country or region which you want to delete from VISM. It can be in
the range from 1 to 64 alphanumeric characters. This argument is case
sensitive.
Tone plan version number of the tone plan country or region you want to delete
from VISM. It can be in the range from 1 to 65535.
Description
Adds a tone plan to the current VISM card.
Configures the ringback tone method for a specified line on the current VISM
card.
Assigns a tone plan to a specified VISM card line.
Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
Deletes the tone plan configuration of a specified VISM card line.
Displays the ringback tone method for a specified line on the current VISM
card.
Displays the tone plan configuration of a specified VISM card line.
Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
Cisco VISM Installation and Configuration Guide
deltoneplan
5-275
Advertisement
Table of Contents
