Table of Contents
Advertisement
cnfdn
cnfdn
To configure the resolution type of a specified domain name, use the cnfdn command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
domain-num
resol-type
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the domain name represented by domain number 2 is configured for
external-only resolution type:
cnfdn 2 2
Related Commands
Command
adddn
adddnip
cnfdnssrvr
deldn
deldnip
dspdnallips
Cisco VISM Installation and Configuration Guide
5-136
cnfdn domain-num resol-type
Domain number used to identify the domain in the range from 1 to 11.
(Optional) Resolution type to configure for the specified domain name. It can be one
of the following values:
1 = Internal only. You must statistically provision all IP addresses on the VISM
•
card for the domain name. The VISM card does not resolve the domain name
using an external domain name server (DNS).
2 = External only. The VISM card attempts to resolve the domain name using an
•
external DNS. Statistically configured IP addresses for this domain name are not
used.
•
3 = Internal first. The VISM card attempts to resolve the domain name using an
external DNS. The VISM card uses the statistically provisioned IP addresses for
this domain name before using IP addresses from external resolution.
•
4 = External first. The VISM card attempts to resolve the domain name using an
external DNS. The VISM card uses IP addresses from external resolution before
using the statistically provisioned IP addresses.
Description
Adds a domain name (call agent name) and optionally configures the resolution type
of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Designates a domain name as a DNS.
Deletes a domain name.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
