Table of Contents
Advertisement
cnflndigitorder
cnflndigitorder
To assign the order in which automatic number identification (ANI) digits—the caller's number—and
dialed number identification service (DNIS) digits—the called number—are dialed during an outgoing
Feature Group D (FGD) call on the endpoints of a specified VISM card line, use the cnflndigitorder
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
line-num
digit-order
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
The ANI and DNIS digits are sent as part of the MGCP setup message.
Examples
The following example shows that the current VISM card's line number 7 is assigned a digit order of
DNIS digits first, followed by ANI digits, for digits dialed during an outgoing FGD call:
cnflndigitorder 7 2
Related Commands
Command
cnfcasflashtime
cnfcasglareattrib
cnfcaspackage
delxgcppersistevt
dspcasglareattrib
dspcaspackage
dspcastimers
dsplndigitorder
Cisco VISM Installation and Configuration Guide
5-166
cnflndigitorder line-num digit-order
Line number for which to configure dialed digit order. In the range from 1 to 8.
ANI and DNIS digit order. It can be one of the following values:
1 = ANI digits followed by DNIS digits.
•
2 = DNIS digits followed by ANI digits.
•
Description
Configures the minimum and maximum CAS on-hook time periods for
incoming flash hooks on a specified endpoint.
Configures the direction of CAS calls and the glare policy for a specified
endpoint.
Configures MGCP packages to notify persistent observed CAS events in the
context of incoming and outgoing CAS calls on a specified endpoint.
Deletes a persistent xGCP event.
Displays the direction of CAS calls and the glare policy for a specified
endpoint.
Displays the MGCP packages configured to notify persistent observed CAS
events in the context of incoming and outgoing CAS calls on a specified
endpoint.
Displays the currently configured CAS timers for a specified endpoint.
Displays the order in which ANI digits and DNIS digits are dialed during an
outgoing FGD call on the endpoints of a specified VISM card line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
