Table of Contents
Advertisement
dspalm
dspalm
To display the alarms associated with a specified line, use the dspalm command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
-ds1
line-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the line 1 alarms are displayed:
dspalm -ds1 1
LineNum:1
LineAlarmState: Alarm(s) On --
LineStatisticalAlarmState: No Statistical Alarms
Related Commands
Command
clralm
dspalms
Cisco VISM Installation and Configuration Guide
5-282
dspalm -ds1 line-num
The mandatory line-num argument identifier.
Line number of the T1 or E1 line for which you want to display alarms. It can be in
the range from 1 to 8.
XmtRAI
RcvLOS
Description
Clears alarms on a specific VISM card line.
Displays all alarms for a selected line type on a VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
