Clear Zone - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear zone

To clear all configured information in the zone server for a specified VSAN, use the clear zone command

in EXEC mode.

Syntax Description

read-only-zoning

Command Modes

Command History

Usage Guidelines

After issuing a clear zone database command, you need to explicitly issue the copy running-config

startup-config to ensure that the running configuration is used when you next start the switch.

When you issue the clear zone lock command from a remote switch, only the lock on that remote switch

is cleared. When you issue the clear zone lock command from the switch where the lock originated, all

locks in the VSAN are cleared.

The recommended method to clear a session lock on a switch where the lock originated is by issuing the

no zone commit vsan command.

The following example shows how to clear all configured information in the zone server for VSAN 1:

switch# clear zone database vsan 1

Related Commands

OL-18089-01, Cisco MDS NX-OS Release 4.x

clear zone {database | lock | statistics {lun-zoning | read-only-zoning}} vsan vsan-id

Clears zone server database information.

Clears a zone server database lock.

Clears zone server statistics.

Clears LUN-zoning related statistics.

Clears read-only zoning related statistics.

Clears zone information for a VSAN.

The ID of the VSAN is from 1 to 4093.

Modification

This command was introduced.

Added the lock option.

Displays zone information for any configured interface.

Cisco MDS 9000 Family Command Reference