Snmp-Server - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

snmp-server

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

To configure the SNMP server information, switch location, and switch name, use the snmp-server

command in configuration mode. To remove the system contact information, use the no form of the

Syntax Description

community string

group group-name

The default community access is read-only (ro).

Command Modes

Configuration mode

Command History

Usage Guidelines

The following example sets the contact information, switch location, and switch name.

switch# config terminal

switch(config)# snmp-server contact NewUser

switch(config)# no snmp-server contact NewUser

switch(config)# snmp-server location SanJose

switch(config)# no snmp-server location SanJose

Cisco MDS 9000 Family Command Reference

snmp-server {community string [group group-name | ro | rw] | contact [name] | location

no snmp-server {community string [group group-name | ro | rw] | contact [name] | location

Specifies SNMP community string. Maximum length is 32 characters.

(Optional) Specifies group name to which the community belongs.

Maximum length is 32 characters.

Sets read-only access with this community string.

Sets read-write access with this community string.

Configures system contact.

(Optional) Specifies the name of the contact. Maximum length is 80

Configures system location.

(Optional) Specifies system location. Maximum length is 80 characters.

Modification

This command was introduced.

Added group option.

OL-18089-01, Cisco MDS NX-OS Release 4.x